Your shopping cart is empty!
Descriptions of Brand-new and Fast-copy Remote Control
In the configuration and selling process, most clients wish to replace the original remote control with a general remote control, while such remote control has not be developed. You may configure your remote control within 2 seconds if you meet the following three conditions:
Condition I: the original remote control may be used normally
Condition II: know the transmission frequency of original remote control (referring to the following diagram)
Condition III: IC of original remote control is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or without code.
Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off.
Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on �?off, indicating it enters to copying status. Use left hand to press The key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys.
Tips: if you reset the code of remote control and want to recover, press two keys until LED light flicks.
IC model of original remote control is 2262 2260 1527 2240 and compatible IC
It is unnecessary to consider vibration resistance and address code. The project may be compatible to vibration resistance and address code.
The inapplicable IC is HCS300 30 and compatible rolling code IC
The battery used in the product is 12V and 23 A. please replace the battery when the remote control distance is insufficient
The fixed working frequency is 315MHz; 433MHz; other frequencies may be customized.
Write a review